How to Set Up an EarthBox Automatic Watering Sensor

Quick answer

Place the EarthBox Automatic Watering System Sensor on top of the water fill tube, connect it to the automatic watering hose, and ensure the sensor sits flush to avoid false readings.

Step-by-step installation

1. 1. Prepare the water fill tube: Ensure the water fill tube is clean and free of debris. Rinse it with water if needed and let it drain completely. A dirty tube can block the sensor from reading correctly.
2. 2. Attach the sensor to the fill tube: Place the sensor on top of the water fill tube, pressing it down until it sits flush. The sensor should not wobble or tilt. If the sensor isn't flush, water may leak or the reading may be inaccurate.
3. 3. Connect the automatic watering hose: Attach the automatic watering system hose to the sensor's connector. Push firmly until you hear a click or feel it lock. A loose connection can cause the hose to detach during watering.
4. 4. Test the system: Turn on the water supply and check for leaks at the sensor connection. Confirm that water flows into the EarthBox reservoir normally. If water leaks, re-check the sensor seating and hose connection.

Product details

• EarthBox Automatic Watering System Sensor: The EarthBox Automatic Watering System Sensor monitors the water level in an EarthBox Original, Junior, or Root & Veg system and connects to an Automatic Watering System hose. You get a reliable water-level check without opening the fill tube, making automated watering practical for busy gardeners or vacation care.